Solid State Relay
25 A AC SPST-NO
90 to 240 VAC

---

Product Use

This Solid State Relay is especially developed for High Current (up to 25 A) switching of AC loads.

Low Voltage (3 to 32 V DC) and Low Current (Typically 15 to 20 milliAmperes) through the Relay Control electronically switches ON a High Current Load (up to 25A) at 90 to 240 VAC.

In constant ON applications it can carry up to 25 Amperes.

These devices have been reliably used since 2015 in following applications:

• Electric Vehicle Chargers
• Power Supplies
• Power Distribution
• Instrumentation
• Deep Well Water Pump Control

Features

• Solid State = NO moving parts
• Single Pole, Single Throw (Off/On, Normally Open)
• Operating / Releasing Time ≤ 5 ms / ≤ 2 ms
• Control Current 20mA @ 12VDC
• Load Voltage: 90VAC Minimum to 240VAC Maximum
• On-Resistance: 0.05 Ohm Maximum
• I/O Breakdown Voltage: 1500Vrms Minimum

---

Product Specifications

ON Control Current (max)	IF ON	20	mA
Control Voltage (min/max)	VF(on)	3-32	VDC
Continuous Load current TC = 25 °C	ID	25	A AC
Continuous Load current TC = 100 °C	ID	20	A AC
Pulsed Load current TC = 25 °C	ID	25	A AC
Power dissipation TC = 25 °C	P	2	W

NOTE: New never used item, however it is old stock and the screw terminal washers and/or pads may have slight oxidation, which can be easily cleaned.
This SSR is valued at $45.00 each - recent pricing at Digi-Key.

---

Pricing

US $19.50 each