Tilt Sensor Module
Product Use
This Tilt Switch Module can be used in both Automotive and Hobby circuits.
Tilt Switch Module detects angle change.
Operates on 3V
to 5V DC.
When the Sensor is "tilted" the normally HI Output Signal is switched to Ground (LO).
The Tilt Switch Module can be used to provide switching ON / OFF signal to any microprocessor such as Parallax Propeller or Arduino.
Features
- Normal Output on S pin is HI = Vbb
- Signal Output on S pin is LO = Ground
- Nominal Voltage 3V to 5V DC
- Operating / Releasing Time ≤ 50 microseconds / ≤ 250 microsseconds
- Over 100,000,000 Electronic Cycles Life
- 0.1" Spaced Pins (3)
- PCB Dimesnions: 0.74" X 0.85"
Connection Diagram
Click the image to enlarge.
INPUT / OUTPUT
Connector (J1)
- S OUTPUT
- Vbb Power 3 VDC to 5 VDC +
- GND (Common System Ground)
Product Specifications
| Sensor source voltage (min/max) | VDS | 3 / 5 | V |
| Switch load current (max) | IL | 20 | mA |
| Operating Temperature | Ton | 20 to 140 -6 to 60 |
°F °C |
Pricing
US $ 5.00 - In stock